PRODUCTION DESCRIPTION
A single component， UV Light Curable， for metal and glass Or plastic bonding， for example wire tacking.
TYPICAL APPLICATIONS
•Wire tacking •Bonding circle •Bonding loud speak
UNCURED PROPERTIES
Base Resin...........................................................................………………………………… dimethacrylate
Color....................................................................................………………………………. Translucent liquid
Viscosity (cps @ 22℃).........................................................………………………………... 6000
Cure Speed (Fixture/Full).......................................................………………………………… 3 sec. /24 hrs.
Specific Gravity..........................................................................…………………………….... 1.12
CURED PROPERTIES
Operating Temperature Range(℃)...........................................……………………………… -40 to 120℃
Tg（℃） .....................................................................................……………………………. 75
Hardness(shore D) ....................................................................…………………………… 78
Sheer Strength (MPa)...................................................................…………………………… 18.8
Elongation , At Break（%） ...........................................................…………………………… 150
Coefficient of Thermal Expansion（PPM/℃） ...........................……………………………. 68
CURED ELECTRICAL PROPERTIES
Dielectric Constant/Loss（1MHz） ....................................………………………………. 3.6
Dielectric Strength（kV/mm） ................................................………………………………. 18
Volume Resistivity（x1014Ω.cm） ..........................................………………………… 2.5
APPLICATION METHOD
(1) For best performance bond surfaces should be clean and free of grease.
(2) The product cures in seconds upon exposure to ultraviolet radiation of 365nm. UV cure rate is dependent on
lamp intensity , distance from light source depth of cure needed or bond line gap and light transmittance of
the substrate through which the radiation must pass. An exposure time is 5-6 times the fixture time at the
same intensity.
STORAGE AND SHELF LIFE
Store in a cool, dry area at a temperature of 5-25℃ for a maximum shelf life of a year. Do not return unused material to
container as it would result in contamination and/or premature hardening of contents.
CAUTION
UV Adhesive are an eye irritant and may also irritate skin. Therefore, skin should be washed after contact with these
products. In case of eye contact, flush with water and seek medical attention. Keep out of the reach of children.
For complete safety and handling information, please refer to the appropriate Material Safety Data Sheets prior to using this product. For technical assistance, please call +512-67065075
ORDERING INFORMATION
Stock No. Unit Size

Note
The data contained herein are for reference only, and are believed to be typical values and should not be regarded as
criteria for checking and accepting. All above data are obtained in DEDT laboratories in standard conditions; DEDT
can guarantee that they are reliable, but DEDT can not guarantee that the actual performances will not deviate due to
different application ambient, different material surfaces and different curing mechanism. Storage conditions, shipping
vehicles and etc. can affect product stability, mechanical and physical performances. We cannot assume responsibility for
the results obtained by others over whose methods we have no control. We strongly suggest that the users do a test
based on the data before formal use of this product.